Interesting read for anyone going Turbo

CrazySX · November 3, 2015, 18:11

m http://www.superstreetonline.com/how-to ... r2-spyder/ m

tomaky · November 3, 2015, 18:47

Good read!

shnazzle · November 3, 2015, 18:58

I enjoyed that. Thanks!
Nothing new, but fun to see one turbo kit provider's steps in turbocharging the 2

CrazySX · November 3, 2015, 19:37

Exactly. Gives you some ideas and shows that they tried a bit of this and a bit of that before actually producing a kit s;)

s;)

I stumbled across it when looking for intercooler pics

tomaky · November 3, 2015, 19:39

It was the size of the intercooler that caught my eye, wonder why they went intercooler and not charge.

shnazzle · November 3, 2015, 19:47

It is huge. And first time I've seen one with a scoop to force air through it. But impressive results on the cooling on and off track

tomaky · November 3, 2015, 19:50

Imagine its effective but could achieve same results with a pwr. I do like the look of all the pipping though and the scoop.

CrazySX · November 3, 2015, 19:58

PWR? I like the intercooler, I am gonna go a similar route. Charge coolers take too much space and too much plumbing.

I was looking at how I good perhaps make a Apex type 2 IC fit, but it maybe a bit overkill hahahaha

tomaky · November 3, 2015, 20:12

PWR barrel charge cooler.

This a pick of mine on when it was fitted to a different car. The rad is at the front.

CrazySX · November 3, 2015, 21:43

Ok, your one doesn't look to bad. I saw LeeSparkys one and it looked rammed in his engine bay.

tomaky · November 3, 2015, 21:57

Will have alook if i can find some pics.

CrazySX · November 4, 2015, 23:08

Quote from: "shnazzle"It is huge. And first time I've seen one with a scoop to force air through it. But impressive results on the cooling on and off track

It's like the noble m12 GTO scoop except upside down. I think it would be better if you could build something into the engine lid to channel air down. Like the M12